The Morrison Bros 710FMO is a normally closed flanged solenoid valve with FKM seals and manual override, designed to prevent accidental siphoning of product from aboveground storage tanks in the event of a downstream leak. The valve opens on receipt of an electronic signal and includes a manual override for operation during power outages.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 474 is a spring-loaded angle-type emergency valve for installation in the bottom outlet of small farm tanks. A UL-listed 165°F fusible link holds the valve open during normal operation and releases to shut off flow automatically in the event of fire.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 574 is a straight-type emergency valve for the bottom outlet of small farm tanks, designed to stop product flow automatically in a fire event. A 165°F UL Listed fusible link holds the spring-loaded valve open until heat activation causes it to close. Not intended for use as a block valve and should not be opened under pressure.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710 and 710MO are normally closed solenoid valves installed on the dispensing side of fuel system pipelines to prevent accidental siphoning in the event of a downstream pipe fracture or leak. The valve opens upon receipt of an electronic signal and features a cast bronze body, FKM/PTFE seals, and an explosion-proof watertight enclosure. The 710MO adds a manual override for operation during power outages.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710F is a normally closed flanged solenoid valve designed to prevent accidental siphoning of product from storage tanks in the event of a downstream leak. Installed on the dispensing side of a fuel system pipeline, it opens on receipt of an electronic signal and is rated for hazardous locations per UL Class I, Division 1.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710FSM are normally closed flanged stainless steel solenoid valves designed to prevent accidental siphoning from a tank in the event of a downstream leak below liquid level. The valve opens on receipt of an electronic signal and features PTFE seals, an explosion-proof enclosure, and zero pressure differential operation. The 710FSM adds a manual override for use during power outages.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710FSS are normally closed flanged stainless steel solenoid valves designed to prevent accidental siphoning from a tank in the event of a downstream leak below liquid level. The valve opens on receipt of an electronic signal and features PTFE seals, an explosion-proof enclosure, and zero pressure differential operation.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710SS is a normally closed stainless steel solenoid valve designed to prevent accidental siphoning of product from storage tanks in the event of a downstream leak. Installed on the dispensing side of a fuel system pipeline, it opens on receipt of an electronic signal and is rated for hazardous locations per UL Class I, Division 1.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 711 is a high-flow pilot-operated normally open piston solenoid valve in forged brass construction with FKM seals. Designed for general-purpose applications including pressure systems, machine tools, water processing, and steam, the valve closes upon receipt of an electronic signal.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 711NC is a high flow, pilot-operated, normally closed brass solenoid valve for general purpose applications including pressure systems, machine tools, water processing, and steam. It opens on receipt of an electronic signal and features an explosion-proof and weatherproof coil housing.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 21 is a brass check valve designed to prevent backflow in suction lines, allowing flow in only one direction. It features a stainless steel spring, Viton gasket, BSPP ISO 228‑1 threads, and an opening pressure of 30 mbar, making it suitable for traditional fuels without additives.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 55 adjustable by-pass valve is designed for use with submersible pumps to reduce pressure and/or flow from the pump to the point of use. Constructed in brass with Viton® seals and a stainless steel spring, it is classified as a safety accessory under Directive 2014/34/EU.
For product enquiry, call us at +966 534503567 or send enquiry
