Ridart 1320 is a complete level monitoring assembly consisting of an explosion‑proof float switch, junction box, and rigid duct for installation through the tank manway. A sliding cable gland allows height adjustment, and the probe can be supplied in custom lengths up to 6 m to suit different tank depths.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 1525 VR is a camlock male vapor recovery adaptor designed to minimize pressure drop and improve vapor recovery efficiency during tanker loading and unloading. Built with an aluminium body and stainless steel internals, it connects a 4" camlock male to a 3" BSPP female thread for traditional fuels and compatible chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 1535 vapor recovery adaptor is a 3" male cam-lock to 3" BSPP aluminium fitting designed to minimise pressure drop and maximise vapor recovery efficiency during tanker loading and unloading. Built to Directive 2014/34/EU requirements, it uses stainless steel internals with Viton® sealing for traditional fuels and compatible products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 180 ENP is an in-line deflagration flame arrester with ribbon coil element, certified to EN ISO 16852:2016 and ATEX Directive 2014/34/EU for use in hydrocarbon and chemical pipelines. It prevents fire propagation into piping and is Stage I vapor recovery compliant. A PTFE-coated variant is available for special fuels, solvents, and chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 181 ENP is a ribbon coil inline deflagration flame arrester designed to prevent fire propagation in hydrocarbon and chemical pipelines. ATEX certified for all zones (0, 1, and 2) and compliant with EN ISO 16852:2016, it is suitable for Stage I vapor recovery systems. A PTFE-coated variant is available for special fuels, solvents, and chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 182 ENP is a brass inline deflagration flame arrester with stainless steel ribbon coil, designed to prevent flame propagation in hydrocarbon and chemical pipelines. It is ATEX IIB3 certified to EN ISO 16852:2016 for gases with MESG > 0.65 mm and is suitable for Stage I vapor recovery and use in zones 0, 1, and 2.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 190 vent cap is used on vapor recovery lines to allow air entry into the tank and help regulate tank atmosphere. An internal screen protects the line from dirt, insects, and other particles that could block the vent. It is not a safety device and should be combined with an appropriate end‑of‑line deflagration flame arrester when used with flammable liquids.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 197 is a pressure vacuum valve designed for Stage I vapor recovery systems on underground storage tanks. It regulates tank pressure to protect against overpressure while reducing fuel evaporation and environmental pollution. Constructed from aluminium with Viton® seals and brass poppets, it complies with ATEX Directive 2014/34/EU.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 197 EN‑P is a pressure vacuum valve combined with an end‑of‑line deflagration flame arrester, designed to regulate tank pressure, reduce evaporation, and protect against external fires. It is ATEX‑certified to EN ISO 16852:2016 for use in Stage I vapor recovery systems on hydrocarbon and chemical storage tanks.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 197 EN-P VENT is an end-of-line deflagration flame arrester vent for Stage I vapor recovery systems on storage tanks. It combines a pressure vent function with a stainless steel ribbon coil flame arrester to stop flame transmission from outside while allowing vapors to be safely vented. Aluminium, PTFE-coated, and stainless steel versions cover a wide range of fuels and chemicals.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 21 is a brass check valve designed to prevent backflow in suction lines, allowing flow in only one direction. It features a stainless steel spring, Viton gasket, BSPP ISO 228‑1 threads, and an opening pressure of 30 mbar, making it suitable for traditional fuels without additives.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 330 ENP is an in-line deflagration flame arrester with ribbon coil element, certified to EN ISO 16852:2016 and ATEX Directive 2014/34/EU for hydrocarbon and chemical pipelines. Available in brass (standard) and stainless steel variants for aggressive solvents, acids, or bases, in sizes from 1" to 4" BSPP.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 425 ENP is a flanged in-line deflagration flame arrester with ribbon coil element, certified to EN ISO 16852:2016 and ATEX Directive 2014/34/EU for hydrocarbon and chemical pipelines. Available in aluminium (standard) and PTFE-coated variants for special fuels, solvents, or chemical products, in 2", 3", and 4" pipe sizes.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 55 adjustable by-pass valve is designed for use with submersible pumps to reduce pressure and/or flow from the pump to the point of use. Constructed in brass with Viton® seals and a stainless steel spring, it is classified as a safety accessory under Directive 2014/34/EU.
For product enquiry, call us at +966 534503567 or send enquiry
