The Morrison Bros FIG 710FSS are normally closed flanged stainless steel solenoid valves designed to prevent accidental siphoning from a tank in the event of a downstream leak below liquid level. The valve opens on receipt of an electronic signal and features PTFE seals, an explosion-proof enclosure, and zero pressure differential operation.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 710SS is a normally closed stainless steel solenoid valve designed to prevent accidental siphoning of product from storage tanks in the event of a downstream leak. Installed on the dispensing side of a fuel system pipeline, it opens on receipt of an electronic signal and is rated for hazardous locations per UL Class I, Division 1.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 711 is a high-flow pilot-operated normally open piston solenoid valve in forged brass construction with FKM seals. Designed for general-purpose applications including pressure systems, machine tools, water processing, and steam, the valve closes upon receipt of an electronic signal.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 711NC is a high flow, pilot-operated, normally closed brass solenoid valve for general purpose applications including pressure systems, machine tools, water processing, and steam. It opens on receipt of an electronic signal and features an explosion-proof and weatherproof coil housing.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 748ALT is a 2" aluminum pressure vacuum vent designed specifically for aqua-ammonia and ag-chemical storage tanks. Pressure and vacuum poppets seal vapors when pressure is equalized, allowing the tank to breathe safely during filling and dispensing operations.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 749 is a pressure vacuum vent for underground and low volume aboveground storage tank vent pipes. Pressure and vacuum poppets seal vapors when pressure is equalized, allowing the tank to breathe safely during filling and discharging. The 749T variant is designed for DEF and products requiring PTFE and stainless construction.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 749CRB is a pressure vacuum vent for underground and low-volume aboveground storage tank vent pipes. Pressure and vacuum poppets seal vapors when pressure is equalized, allowing the tank to breathe during filling and discharging. CARB-certified models are available, and select models meet EPA 40 CFR Part 63 requirements for Gasoline Dispensing Facilities.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 749CRBS is a slip-on style pressure vacuum vent for underground and low volume aboveground storage tanks used in motor fueling. Poppets seal vapors when pressure is equalized, allowing the tank to breathe safely during filling and discharging operations.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 749S is a slip-on style pressure vacuum vent for underground and low-volume aboveground storage tank vent pipes. Pressure and vacuum poppets seal vapors when pressure is equalized, allowing the tank to breathe during filling and discharging operations. Settings are approximate.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 922 combines a pressure vacuum vent and an audible overfill alarm in a single unit, installing on top of the vent pipe through one 2" or 3" tank opening. The fully mechanical whistle alarm requires no electricity or batteries, activating at a preset liquid level during filling operations.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 244OF is a UL Listed flanged emergency vent for aboveground storage tanks, designed for pressure relief only to prevent tank rupture under fire exposure conditions. Available in 4" to 10" with 2.5, 8, or 16 oz/sq.in. pressure settings, it must be used in conjunction with a normal or pressure-vacuum vent and correctly sized for the specific tank application.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros 245 series is a lightweight, spring-loaded emergency vent for aboveground storage tanks, designed for pressure relief only to prevent tank rupture under fire exposure conditions. Available in male threaded, female threaded, and flanged configurations from 2" to 10", it must be used in conjunction with a normal or pressure-vacuum vent.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros 244OM is a UL Listed male threaded emergency vent for aboveground storage tanks, designed for pressure relief only to prevent tank rupture under fire exposure conditions. It must be used in conjunction with a normal or pressure-vacuum vent and properly sized for the specific tank application to meet required venting capacity.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 748A is a 2" aluminum pressure vacuum vent for aboveground and underground storage tanks, installed on top of the vent pipe. Poppets seal vapors when pressure is equalized and open to allow the tank to breathe during filling and dispensing. Must be used in conjunction with an emergency vent.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 748A is a 3" aluminum pressure vacuum vent designed for installation on top of the vent pipe of an aboveground storage tank. Poppet seals retain vapors when pressure is equalized, allowing the tank to breathe during filling and dispensing while venting outward and upward in compliance with NFPA 30. Must be used in conjunction with an emergency vent.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 748A is a 2" pressure vacuum vent with pressure discharge hood, designed for installation on aboveground or underground storage tank vent pipes. Poppets seal vapors when pressure is equalized, allowing the tank to breathe safely during filling and dispensing operations.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 918AC is an AC-powered console designed to monitor 1 to 4 simple input switch devices, providing audible and visual indication upon activation. Up to 4 configurable relay outputs can be added to interface with remote indicators or external switch-activated devices. Plug-n-play modules allow for easy system expansion and customization.
For product enquiry, call us at +966 534503567 or send enquiry
The Morrison Bros FIG 918SB, 918DB, and 918QB are intrinsically safe tank alarm boxes with a 360° rotating visual beacon and 90 dB audible horn for alarm indication upon activation of a simple switch input. Self-powered by a long-life replaceable lithium battery, they are available in single, dual, and quad input channel configurations.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 1320 is a complete level monitoring assembly consisting of an explosion‑proof float switch, junction box, and rigid duct for installation through the tank manway. A sliding cable gland allows height adjustment, and the probe can be supplied in custom lengths up to 6 m to suit different tank depths.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 1525 VR is a camlock male vapor recovery adaptor designed to minimize pressure drop and improve vapor recovery efficiency during tanker loading and unloading. Built with an aluminium body and stainless steel internals, it connects a 4" camlock male to a 3" BSPP female thread for traditional fuels and compatible chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
Ridart 1535 vapor recovery adaptor is a 3" male cam-lock to 3" BSPP aluminium fitting designed to minimise pressure drop and maximise vapor recovery efficiency during tanker loading and unloading. Built to Directive 2014/34/EU requirements, it uses stainless steel internals with Viton® sealing for traditional fuels and compatible products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 180 ENP is an in-line deflagration flame arrester with ribbon coil element, certified to EN ISO 16852:2016 and ATEX Directive 2014/34/EU for use in hydrocarbon and chemical pipelines. It prevents fire propagation into piping and is Stage I vapor recovery compliant. A PTFE-coated variant is available for special fuels, solvents, and chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 181 ENP is a ribbon coil inline deflagration flame arrester designed to prevent fire propagation in hydrocarbon and chemical pipelines. ATEX certified for all zones (0, 1, and 2) and compliant with EN ISO 16852:2016, it is suitable for Stage I vapor recovery systems. A PTFE-coated variant is available for special fuels, solvents, and chemical products.
For product enquiry, call us at +966 534503567 or send enquiry
The Ridart 182 ENP is a brass inline deflagration flame arrester with stainless steel ribbon coil, designed to prevent flame propagation in hydrocarbon and chemical pipelines. It is ATEX IIB3 certified to EN ISO 16852:2016 for gases with MESG > 0.65 mm and is suitable for Stage I vapor recovery and use in zones 0, 1, and 2.
For product enquiry, call us at +966 534503567 or send enquiry
